DIN 8555

MF3– 45-CKTZ

 

	C	Si	Mn	Cr	Mo	Co	Ni
KJTUB-498Co	0.15	0.25	0.5	16	4	16	0.6

 

Weld Metal Hardness : 44-48 HRC

Machinability : Good

Abrasive wear resistance : Excellent to at high temp.

Impact resistance : fair

Heat resistance : Excellent

Packing : Spool of 15Kg and 25Kg, 250Kg Drum

Size (mm) Mode of Application 1.20-1.60-2.40-2.80 MIG-MAG

 

KJTUBG-498Co is self shielded flux cored wire with Co, Cr, Mo and Fe alloy content used with Co2 shielding gas. Weld deposit has ample resistance to corrosion. Suitable for forging moulds, hot strip mills, pinch rolls, table and back up rolls . Shielding Gas: Ar + 20% Co2 and/or 100% Co2 Current: DCEP Welding position: Flat and horizontal KJTUBG-498Co is almost equivalent to the following wire: CORODUR CORTHAL 498 MIG ESAB Tubrodur 15.52 BOHLER DUR 600 SOUDOKAY 600 G